Specifications & Performance
Model | MC-200C-6018◦ (blank: without I/F board, D: with I/F board) |
Supply voltage | Rated DC 48 V (DC 12 V −5% to 60 V +5%) |
Continuous current | 3.5 Arms |
Peak current (< 1 s) | 18 Arms |
Drive method | Sine-wave PWM (50 kHz) |
Control modes | Position, speed, current |
Protections | Overcurrent, overload, overvoltage, undervoltage, encoder error |
Communication | USB 2.0 micro-AB for parameter setup, status monitoring, and command control |
External commands | SPI, USB. Additional interfaces planned |
I/O signals | Servo ON, alarm, alarm reset |
Dimensions | 30 × 35 × 14 mm (without I/F board), up to 30 × 35 × 30 mm (with I/F board) |
Mass | 20 g (without I/F board), 30 g (with I/F board) |
Note | Power and control circuits are not galvanically isolated |
Dimensions & Wiring Examples
MC-200C-6018 (without I/F board)


MC-200C-6018D (with I/F board)


Cable Options
Part No. | Connection |
CN2 Flex Cable (4.2) 0.7 m | Motor leads. Extends motor to driver to total length 1 m |
CN2 Flex Cable (4.2) 2.7 m | Motor leads. Extends motor to driver to total length 3 m |
CN2 Flex Cable (4.2) 4.7 m | Motor leads. Extends motor to driver to total length 5 m |
CN3 Flex Cable (4.2) 0.7 m | Encoder leads. Extends motor to driver to total length 1 m |
CN3 Flex Cable (4.2) 2.7 m | Encoder leads. Extends motor to driver to total length 3 m |
CN3 Flex Cable (4.2) 4.7 m | Encoder leads. Extends motor to driver to total length 5 m |
- CN1/CN4 connector cables and CN2/CN3 converter cables are included with the product.
MTLParam Application
Set parameters, monitor status, and send commands from your PC.
Program functions let you run control sequences from the driver without an external controller.
Download the application from this page.
Supported OS: Windows 10 (32-bit / 64-bit)

Support
Count on us for long-term, reliable operation.
-
After-sales Service
All components are sourced in Japan to keep quality and lead times stable. We maintain production continuity and do not discontinue models for internal reasons. Small lot orders are welcome — we can supply from a single unit, including custom models.
-
Selection Assistance
Tell us your target specs and our specialists will recommend the best model. If you’re unsure which motor fits your needs, we’ll explain the differences clearly and guide you to the right choice.